200 Watt Hylight Heads

Hylight DR203

Here is an example of a Hiwatt PA head, DR203 Model "PA", 4 x KT88.

The front view
An oblique view
The rear view
The rear view, cover removed
The top view
The chassis
The internal view

Pictures courtesy of Peter M.

Hylight DR203

Here is an example of a Hiwatt PA head, DR203 Model "PA", 6 x EL34.

Pictures courtesy of John L.

Hylight DR201

The 200-watt DR201 came in two variations, one (like this example) used six EL34 output tubes, while the other used four KT88s. Loud.

The front view of the chassis
The rear view of the chassis
The cap cans on the left side of the chassis
The cap cans on the right side of the chassis
The output jack area
The input jack area
The power and fuse area
The left side of the preamp tag board
The right side of the preamp tag board
A close up composite image of the preamp tag board
The power tag board
A close up composite image of the power tag board

Pictures courtesy of Steve (aka klyniss)

Hylight DR201

Another clean example of the six-EL34 output tube version.

The front view of the chassis
The rear view of the chassis
The internal view

Pictures courtesy of Jeff S.

Hylight STA 200

The 200-watt STA 200 "slave" amp was basically ar DR 201 without the front part of the preamp and tone controls. It was used most often in P.A. applications, but could also be used slaved from a regular DR head. This is a four KT88 model.

The front view
The rear view
The chassis (top view)
A closeup of the power transformer
A closeup of the output transformer
The internal view, power end
The internal view, output end

Main Hiwatt Page